skip to Main Content

FREE SHIPPING ON ALL ORDERS OVER £50. Visit our Online Shop today! Dismiss

+44 (0) 1293 530196                 

1010a Indoor Air Quality Meter

Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air.

The TPI 1010a Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

The 1010a IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature.

  • Calculate percent outside air to maintain acceptable CO2 levels in buildings and work spaces
  • Measure and display Carbon Dioxide (CO2) and Carbon Monoxide
  • Measure ambient air temperature
  • Measure relative humidity, dew point and wet bulb
  • Log up to 4,000 readings in 1 second to 23 hour 59 minute intervals
  • Download to a computer using the A368 USB cable
  • Print via I/R to optional printer (Model A740)

Product Software & Documentation

Click below to download 1010a Data Logging Software, or view or download product documentation PDFs:

Download 1010a Software

1010a Manual

1010a Product Sheet

£550.00 RRP exc. VAT 

Where to Buy TPI Products

The 1010a IAQ meter uses state of the art sensors to measure humidity, carbon dioxide (CO2), and temperature. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

The TPI 1010a Indoor Air Quality meter comes complete with the following standard accessories:

• TPI 1010a Instrument
• Protective Rubber Boot (A800)
• Soft Carrying Case (A921)
• USB Cable & Software (A803)
• Instruction Manual

The TPI 1010a Indoor Air Quality meter has the following optional accessories available:

• Power adapter / Battery eliminator (A804)
• Magnetic strap kit to hang meter (A127)
• Boot hook to hang meter (A103)
• Replacement Software only (A802)
• Replacement USB cable only (A801)

 Model 1010a Specifications
 Function: CO2  Range: 0 to 5000ppm
 Accuracy: 50°F~104°F: ±5% of rdg+75ppm
 <50°F, >104°F: ±10% of rdg+75ppm
 Function: Temperature  Range: -5°F to 140°F
 -20°C to 60°C
 Accuracy: ±2°F
 Function: Dew Point Temperature  Range: -47°F to 135°F
 -44°C to 57°C
 Accuracy: Calculation
 Function: Wet Bulb Temperature  Range: 3°F to 135°F
-16°C to 57°C
 Accuracy: Calculation
 Function: Relative Humidity  Range: 5% to 95%
 Accuracy: ±2°F
 Function: % Outside Air  Range: 0 to 100%
 Accuracy: Calculation
 Function: CO  Range: 0 to 500ppm
 Accuracy: ±3ppm or ±5% of rdg whichever is greater
 Data Logging  Up to 4,000 samples 1 sec to 23hr 59min interval
 Display Type  3 line with annunciators and backlight
 CO2 Alarm  Audible and visual, selectable level (factory default 30ppm)
 Operating Temperature & Humidity  CO and CO2: 14°F to 122°F (-10°C to 50°C)
 All Other Function: -4°F to 140°F (-20°C to 60°C)
 Humidity 15 ~ 95% non-condensing
 Storage Temperature  -4°F to 140°F (-20°C to 60°C)
 Power supply  3 AA batteries ( 4.5V)
 AC/DC adapter 5Vout (Center positive)
 Battery Life: 40 hours typical without backlight
 Output  Serial output via USB connection
 Infrared output to optional A740 printer/td>

Model 1010a Applications

  • Check ambient CO and CO2 levels in work and living spaces
  • Monitor results of air control systems
  • Ambient air temperature and humidity
  • Test dew point and wet bulb humidity

TPI Model 1010a IAQ Meter Introduction Video

Back To Top